This is a comparison of the security features of devices currently or previously supported by CopperheadOS along with those we plan to support in the future.
Obsolete devices no longer supported by Android or CopperheadOS like the Nexus 5 are included to document historical progress.
HiKey and HiKey 960 are supported devices but aren’t compared here because they’re primarily development platforms and it wouldn’t make sense to compare the (lack of) security properties.
The Samsung Galaxy S4 International LTE variant (jfltexx) used to be supported by CopperheadOS Alpha but we see that as a distinct operating system from CopperheadOS Beta and later where it became directly based on the Android Open Source Project and moved to fully signed production builds.
The following security properties are provided by our current generation hardware targets and are considered hard requirements for expanding CopperheadOS support to future devices:
CopperheadOS can be ported to other devices but will only officially support devices meeting these requirements.
We expect to make the following into requirements by the end of 2018:
Note that the end-of-life date is a minimum guarantee from the OEM and is subject to change. CopperheadOS can continue OS updates past end-of-life for a long time but full security updates require continued releases of the firmware for components like the baseband, WiFi, TrustZone, etc.
|Pixel 3a||10 (current)||May 2022|
|Pixel 3aXL||10 (current)||May 2022|
|Pixel 3||10 (current)||October 2021|
|Pixel 3XL||10 (current)||October 2021|
|Pixel 2XL||10 (current)||October 2020|
|Pixel 2||10 (current)||October 2020|
|Pixel XL||10 (EOL)||December 2019|
|Pixel||10 (EOL)||December 2019|
|Nexus 6P||Oreo M3 (EOL)||November 2018|
|Nexus 5X||Oreo M2 (EOL)||November 2018|
|Nexus 9||n/a||October 2017|
|Nexus 5||n/a||October 2016|
In addition to making future updates substantially easier and improving testing / verification, Treble substantially improves security by splitting up the HAL implementation into many isolated processes and reducing kernel attack surface.
|Device||Verified boot||Rollback protection||Key enforcement||OS public key fingerprint display||A/B update support||Serial debugging while locked||OEM unlocking toggle||Anti-theft protection|
|Pixel 2 XL||Full||Yes||Direct + via encryption||Strong implementation in progress||Yes||Restricted||Yes||Yes|
|Pixel 2||Full||Yes||Direct + via encryption||Strong implementation in progress||Yes||Restricted||Yes||Yes|
|Pixel XL||Full||No||Only via encryption||Strong implementation in progress||Yes||Restricted||Yes||Yes|
|Pixel||Full||No||Only via encryption||Strong implementation in progress||Yes||Restricted||Yes||Yes|
|Nexus 6P||Full||No||Only via encryption||Weak (64-bit via 16 hex characters)||No||Yes (despite toggle)||Yes||Without boot password|
|Nexus 5X||Full||No||Only via encryption||Weak (48-bit via 12 hex characters)||No||Yes||Yes||No|
|Nexus 9||Partial||No||n/a||n/a||No||Yes||Yes||Without boot password|
2nd generation Pixels introduce verified boot rollback protection (Android Verified Boot 2.0) rather than only enforcing it in the update client and recovery.
A/B update support provides two sets of OS partitions (A and B slots) with support for safe atomic swaps between them. This requires a fair bit of firmware support and includes automatic rollbacks of updates after they’re installed if booting the OS fails multiple times. The freshly booted new OS version will verify the installation late in the booting process and will then mark the boot as successful, otherwise rollback will happen after multiple attempts without success.
CopperheadOS has a modern update client for A/B update devices implementing fully automatic updates with automatic resume after failure at any point in the download, verification, installation and post-installation verification process. Previously, CopperheadOS used a fork of the CyanogenMod / LineageOS CMUpdater app which is still the update client on CopperheadOS Nexus devices and it isn’t very friendly or robust and it isn’t able to resume downloads or attempt to perform installation again without deleting the download or starting over, unlike the new update system.
|Device||Vendor||Robust scanning MAC randomization||Robust associated MAC randomization|
|Pixel 2 XL||Qualcomm Atheros||Yes||Yes, but only at boot for now (CopperheadOS only)|
|Pixel 2||Qualcomm Atheros||Yes||Yes, but only at boot for now (CopperheadOS only)|
|Pixel XL||Qualcomm Atheros||Yes||Yes (CopperheadOS only)|
|Pixel||Qualcomm Atheros||Yes||Yes (CopperheadOS only)|
|Nexus 6P||Broadcom||Partial (only rotated random MAC)||No|
|Nexus 5X||Qualcomm Atheros||Yes||No|
|Nexus 9||Broadcom||Partial (only rotated random MAC)||Partial (CopperheadOS only)|
|Nexus 5||Broadcom||Partial (only rotated random MAC)||Partial (CopperheadOS only)|
See the Android blog post on Changes to Device Identifiers in Android O for an overview. Qualcomm Atheros WiFi on Nexus / Pixel devices has enhanced drivers / firmware providing more robust MAC randomization than can be accomplished by CopperheadOS via the usual device-agnostic kernel and userspace MAC randomization support.
Associated MAC randomization similarly requires cooperation from the firmware and drivers to avoid leaking other identifiers or the radio broadcasting before the MAC is randomized. On Pixel phones, CopperheadOS uses a custom implementation for Qualcomm Atheros after determining that there was no way to achieve the desired results via the standard MAC changing API.
|Device||Key / verified boot attestation||Disk encryption keys||Disk encryption key tied to verified boot key|
|Pixel 2 XL||Yes||Encrypted by TEE||Yes|
|Pixel 2||Yes||Encrypted by TEE||Yes|
|Pixel XL||Partial||Encrypted by TEE||Yes|
|Pixel||Partial||Encrypted by TEE||Yes|
|Nexus 6P||No||Encrypted by OS with TEE||Yes|
|Nexus 5X||No||Encrypted by OS with TEE||Yes|
|Nexus 9||No||Encrypted by OS with TEE||No|
|Nexus 5||No||Encrypted by OS with TEE||No|
|Device||Hardware key escrow for authentication / encryption|
|Pixel 2 XL||Yes|
The Pixel 2 introduced a dedicated Hardware Security Module (HSM) with support for performing key escrow used to improve encryption key derivation. The OS needs to provide valid credential-derived tokens to get back randomly generated tokens stored in the HSM. These random tokens are an extra input for credential-derived key derivation. The HSM has a secure internal timer and enforces exponentially growing delays on authentication failures, which results in decryption having hardware-enforced throttling without actually needing to grant any trust to the HSM.
Disk encryption keys are randomly generated and stored encrypted via key encryption keys derived from user credentials and other inputs. On older devices, the TEE was used as part of the process of deriving the key encryption key with scrypt in the OS. On newer devices, the OS uses scrypt to perform similar key derivation with scrypt and passes the output to the TEE. This puts the TEE in a better position as it can perform hardware-bound key derivation via features like using Qualcomm Crypto Engine HMAC support for hardware-bound HKDF. Details on the current implementation are not currently made available but it’s at least as good as the old implementation and the TEE is no longer crippled by a lackluster API at the boundary with the OS.
|Device||Memory standard||TRR||ECC||Rowhammer susceptibility|
|Pixel 2 XL||LPDDR4||Yes||No||Moderate (varies)|
|Pixel 2||LPDDR4||Yes||No||Moderate (varies)|
|Pixel XL||LPDDR4||Yes||No||Moderate (varies)|
|Nexus 6P||LPDDR4||Yes||No||Moderate (varies)|
|Nexus 5X||LPDDR3||No||No||Very high (varies)|
|Nexus 9||LPDDR3||No||No||Very high (varies)|
|Nexus 5||LPDDR3||No||No||Very high (varies)|
Features supported by every currently supported device like heap canaries are not listed. Unlike the tables above, this is software related so this table is specific to CopperheadOS and in theory these features could be backported further if we had more resources. However, the priority would be backporting more changes from mainline / linux-hardened to the latest devices.
|Device||LTS Branch||PXN||PAN||HARDENED_USERCOPY||FORTIFY_SOURCE||RO protection||SSP||ASLR||Clang + -fsanitize=local-init|
|Pixel 2 XL||4.4||Hardware||Software||Yes||Yes||Basic||Strong + zero byte||Hardened, 39-bit address space||Yes|
|Pixel 2||4.4||Hardware||Software||Yes||Yes||Basic||Strong + zero byte||Hardened, 39-bit address space||Yes|
|Pixel XL||3.18||Hardware||Software||Yes||Yes||Basic||Strong + zero byte||Hardened, 39-bit address space||No|
|Pixel||3.18||Hardware||Software||Yes||Yes||Basic||Strong + zero byte||Hardened, 39-bit address space||No|
|Nexus 6P||3.10||Hardware||No||No||No||Weak||Strong + zero byte||Basic, 39-bit address space||No|
|Nexus 5X||3.10||Hardware||No||No||No||Weak||Strong + zero byte||Basic, 39-bit address space||No|
|Nexus 9||3.10||Hardware||No||No||No||Terrible||Basic||Basic, 39-bit address space||No|
|Nexus 5||3.4||No||No||Yes||No||Terrible||Basic||Hardened, 32-bit address space||No|
See the relevant Android documentation for details. File-based encryption (FBE) has per-profile encryption keys and splits up storage into credential encrypted (default) and explicitly opt-in device encrypted storage available before the device is unlocked. For example, the modern CopperheadOS Updater app marks itself as Direct Boot aware and marks the update settings as device encrypted in order to perform updates before the device is unlocked. It enables fully automatic maintenance of an idle device. In the future, FBE will also enable authenticated encryption and storage classes for protecting data while locked by dropping a set of keys derived from the user credentials from memory when it locks. Devices are almost always turned on and keys can be physically extracted from a device that’s turned on so FBE is crucial for improving disk encryption to meet real world needs. It’s possible to protect data while locked today, but app developers are too lazy to do it via the keystore and need an easy mechanism via a new FBE storage class.
The drawback of FBE is that it can leak more metadata when comparing devices that are turned off. For example, even though file names are encrypted some information can be gained based on their size. CopperheadOS increases the padding of file names from the default 4 bytes to 32 bytes. The protection of other metadata will improve over time as part of Linux ext4 development. Device encrypted data is very explicitly opt-in and few apps take advantage of it so that isn’t a serious concern for apps, but it is one for the base system since it uses it a fair bit to implement a fully functional OS in early boot. Our view is that these issues are not major ones and can be worked through. The advantages of FBE will far outweigh the disadvantages in the future. It would be possible to layer FBE on top of FDE but there would need to be a boot password again for it to accomplish much and that would lose the usability advantages of Direct Boot along with truly fully automatic update support. It’s something we can consider for the future, but mitigating the side channel metadata leakage for devices that are turned off is far less important to us than advancing protection of data while the screen is locked by moving as much as possible to a new storage class.
File-based encryption requires firmware support to be fully implemented. There was an experimental version ported by Google to the Nexus 5X and 6P but it shouldn’t be used beyond testing and cannot be considered robust or secure. It isn’t quite the same as the real thing and the legacy update client on CopperheadOS Nexus devices cannot perform updates if it’s enabled.
|Pixel 2 XL||FBE|